GERMA 4 Channels Cloning Copy Duplicate Remote Control 433MHZ Clone Fixed Learning Code For Car Gate Garage Door Transmitter
GERMA 4 Channels Cloning Copy Duplicate Remote Control 433MHZ Clone Fixed Learning Code For Car Gate Garage Door Transmitter
Specifications:
Packing method: opp
Working current: 10mA
Radiation power: 10mw
Transmission frequency: 433MHZ
Transmission distance: 50-100M (open area, the sensitivity of the receiving device is negative 100dbm)
Encoder type: fixed code. learning code
Color: ABCD button/switch lock button/number 1234/up and down buttons
Function: copy remote control/test remote control/copy remote control
Size: 5.4×2.9×1.4 (cm)
Weight: 28 grams
Application scope:
The remote control is widely used, mainly used for remote control of electric retractable doors, elevators, remote control barriers, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms , MP3 motorcycle anti-theft alarm, etc.
Package Included:
1*433MHZ Remote Control
Notes:
Please confirm before buying, this remote control is 433mhz!
*Compatible learning/fix code remote control chips:
2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers),
527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers)
HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC
PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211
HCS101, HCS200, HCS201, HCS300, HCS301(only part work)
Some remotes that use this frequency are listed above. If you fail in copying with proper operation, you might have to check whether your device has a chip above).
How to Program:
1.Pls clear the testing code before copy.
Press the upper 2 buttons at the same time until the LED light flashes 3 times quickly, then release any one of the buttons (the other one keep pressing), and press this button 3 times, then release both buttons after the LED light fiashes quickly. The LED light doesn't turn on when you press any button, that means you' ve removed the code.
2.Studying Code.
Press and hold one button on this remote, and also the same on your remote controller, make them close to receive the signal 3 seconds, LED light will quickly flash and then always on, then release the button . Try to press this button, LED light will be on, that means you have copied successfully. Do the same steps to other buttons.
3.Recovery function.
If you delete the useful codes accidently, you can press the 3& 4th buttons at the same time until the LED light flashes quickly 3 times then recover successfully.
Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage.
