GERMA 433Mhz Wireless AC 250V 110V 220V 2CH Relay Receiver Module + 4channel RF 433 Mhz Remote Control Transmitters
Original price
$3.00
-
Original price
$7.00
Original price
$7.00
$3.00
-
$7.00
Current price
$7.00
Specifications Of The Transmitter
Material: Metal and PVC
Product Type: KT01-117S-4
RF Frequency: 433 MHz
Channel Supported: Four Channel
Encoding Type: Learning Code(1527), Fixed Code(2262).
Modulation System: ASK
Operating Voltage:DC 12V
Operating Current:<25mA
Transmitting Power: +13dbm
Frequency Windage: ±0.2MHz
Transmission Distance: 50m (Free Space)
Color: Black
Main Item Size: 5.4 * 2.9 * 0.9cm / 2.1 * 1.14 * 0.35oz
Main Item Weight: 26g/0.9oz
Package Size: 5.5 * 3.0 * 1.0cm /2.16 * 1.18 * 0.39oz
Package Weight: 30g/1.0oz
Specifications Of The Receiver:
Model Number : KR2202-4
Product Type: Dual Channel Remote Control Switch
Encoding Type: Intelligent Learning Code
RF Working Mode: Superheterodyne Reception
Modulation Mode: ASK
Working Mode: Momentary, Toggle and Latching Mode.
RF Frequency: 433MHz
Input Voltage: AC 85V~250V
Standby Current:<8.5mA
Receiving Sensitivity: >97dbm
Remote Control Range: >50m (Free Space)
Wired Connection Way: Fixed Wiring Pillar
Output Terminal: NO, COM, NC
On-off Output (Wire Port): NO(Normal Open), COM(Commonality End), NC(Normally Closed End).
Color: Green (PCB Board), White (Outside Shell)
Circuit Board Size: 7.3 * 5.2 * 2.5cm
Package:
Please select the package you need, we will send as the option you choose.
Operation Introduction:
About Working Mode:
Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.
Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.
Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Clearing the Code:
Press the Learning Button on the receivers for 8 times, the codes will be cleaned.
After cleaning the code, all the remote control cannot work any more.
Learning the Code:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, it means learning successfully.
Learning the Code: (Toggle)
Press the learning key on the receiver twice time, it comes into toggle setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Press the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, it means learning successfully.
Learning the Code:( Latching)
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.
For example: Button A = ON, Button B = OFF
Press the learning key on the receiver triple time, it comes into latching mode .
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Press the remote button A. LED flash for 5 times.
Press the remote button B. LED flash for 5 times
After 3 seconds, the LED indicator will be on again, learning successfully.
A = ON, B = OFF.
A = ON, B = OFF.
